Motionless Mixers
70 Series
85 Series
100 Series
120 Series
140 Series
160 Series
230 Series
Dispensing Valves/Guns
400 Autogun
450 Autogun
550 Autogun
Tah Products

120 Series Mixers

The plastic spiral elements were developed for adhesive and sealant mixing applications. the mixer consists of a series of left and right hand spiral elements. TAH's mixers have the patented "Apple Core" cross section. This patented geometry ensures: longer life, 30% greater flow rate and flushes clean with less solvent. The elements are injection molded in one operation. This procedure ensures excellent quality control and low unit cost. For adhesive and sealant applications, our Polyplas material is recommended. If required, TAH also offers these elements in other engineered plastics, such as Polypropylene and Kynar. Consult your Urethane Service representative for more details.

Chemical Resistance*

Polyplas is our proprietary plastic developed to have the toughness and chemical inertness required by the Adhesives and Sealants industry. PolyPlas is completely inert to all common solvents, such as MEK, acetone and methylene chloride. Its maximum service temperature is 250F. Polyplas is not recommended for mixing water and acids.

Individual Mixing Elements  >>>

Copyright © 2000 ZUS Urethane Service, Inc. All rights reserved.

The 120 Series  >>>
Order the 120 Series Mixers here  >>>

Empire West / Urethane Service     

12104 E Park Street

Cerritos, CA 90703

Tel.# 866-397-8677

Fax # 562-404-0687


Welcome to ZUS Urethane Service on-line.